DoorV - The Garage Door Banner

Shown below are the easy-to-follow instructions for installing a DoorV banner which are included with every order:

(

Download Instructions)

Step 1
Open garage door so bottom of door is 4 to 6 inches from ground.

Step 2
Take one clip from carton and, standing to the left of the center of door, place clip over top edge of door.

Step 3
Take one cord from carton and pass it through grommet in top left corner of banner as shown. (A)
Hang resulting loop over end of clip attached to garage door. (B)

Step 4
Place a second clip over top edge of door to the right of center. Pass a second cord through grommet in
top right corner of banner as shown in Step 3 and hang loop on end of second clip. (Make sure banner is centered.)

Attach remaining clips to bottom of door using Steps 2 through 4.

Step 5
Banner is now installed. Raise and lower garage door as normal. Your DoorV Garage Door Banner will not interfere with garage door operation in any way.

To Uninstall and Store:

1) Unhook cords from clips.

2) Remove cords from banner; roll banner up and place banner & cords in carrying carton.

3) Open garage door so bottom of door is 4 to 6 inches from ground.

4) Remove clips from garage door and place in carrying carton.

Home • Door V • How it Works • Real Estate • Contact Us • Order Now